ServicesMetal Roofing
Metal Roofing in Rocky Ripple, IN
We put standing seam and screw-down metal roofs on homes in Rocky Ripple and the towns around it. First comes a free roof inspection and a written estimate. Once the panels are on, we return to look the roof over and leave you simple care notes.

When a metal roof is the right call
A metal roof costs more up front than shingles. In return it can last decades longer and sheds rain and snow fast. It makes sense if you plan to stay in your home a long time, if you are tired of patching shingles after every storm, or if part of your roof is too flat for shingles to work well.
It is not right for every house. If you plan to sell soon or the budget is tight, our shingle roofing may be the better buy. We will tell you which way we would go and why.
Metal moves. Panels grow and shrink as the weather swings from summer heat to hard winter cold, so the clips, screws and trim have to allow for it. That movement is what we watch for when we come back after the job.
What the work includes
Tear-off or overlay
We check the decking and count the layers already on the roof. Most of the time we tear off down to the wood so we can replace soft spots. If an overlay is allowed and the roof below is sound, we lay out the trade-offs before you choose.
Underlayment and ice barrier
Metal goes over a synthetic underlayment made for the heat that builds under panels. We add ice and water barrier at the eaves, in the valleys and around chimneys, where melting snow likes to back up.
Panels picked for your roof
Standing seam panels hide their fasteners and ride on clips that let the metal move. Screw-down panels cost less, but they rely on rubber washers that wear out over time. We bring samples and colors of both.
Flashing and vented ridge
Chimneys, vents, skylights and wall joints get metal flashing bent to fit. The ridge is vented so the attic breathes and moisture does not collect under the panels.
Snow guards over doors and walks
Snow slides off metal in sheets. We set snow guards above entries, walkways and decks so it does not drop where people walk.
Magnet cleanup
Cutting and screwing metal leaves small shavings. We pick them up with magnets on the roof and in the yard, since a stray shard left on a panel can rust a stain into new paint.
Signs metal may be your next roof
Shingles keep failing
If you have patched or replaced shingles more than once, the costs add up. Metal holds up better to wind and keeps its coating for decades.
Hail keeps finding your roof
Repeat storm damage on the same roof is a hint. Heavier gauge metal handles hail better than most shingles, though big stones can still dent it.
A low-slope section leaks
Porch roofs and additions are often too flat for shingles. Standing seam can keep water out on slopes where shingles let it in.
Old screw-down panels are loose
On an older metal roof, washers dry out and screws back out. Leaks show up at the screw heads. Sometimes we can re-screw it; sometimes new panels make more sense.
Ice dams every winter
Snow tends to slide off metal before it builds up at the eaves. Paired with good attic venting, that cuts down on ice dams.
How a metal roof job runs
- 1
Free inspection and estimate
We get on the roof, look at the decking from the attic, measure and take photos. You get a written estimate with each line spelled out, and we go over panel types and colors with you.
- 2
Permit and ordering
We pull the permit. Panels are usually cut to length for your roof, so we order after measuring and set the start date once the material is in.
- 3
Install days
We cover flower beds and park the trailer near the house. Each day we strip only as much old roofing as we can dry in before we leave, so nothing sits open overnight. Then underlayment, flashing and panels go on. Metal takes a few days longer than shingles.
- 4
Walkthrough and sign-off
We sweep the yard and driveway with magnets and walk the job with you. The permit gets its final inspection.
- 5
We check back
After the roof has been through a stretch of heat and cold, we come back to look at fasteners, sealant and trim. We tighten or reseal anything that moved and answer any questions you have.
What moves the price of a metal roof
Metal costs more than shingles, and the spread between jobs is wide. Your written estimate shows each piece so you can see where the money goes. We also offer financing if you would rather spread the cost out.
- Panel type and gauge
- Standing seam costs more than screw-down panels. Thicker steel costs more than thin, and it holds up better to hail.
- Roof shape
- Valleys, dormers, chimneys and skylights all mean more cuts and more custom flashing. A simple gable roof goes faster.
- Decking condition
- Rotted or spongy boards get swapped out first, since panels need solid wood under them. If we run into any, you see pictures and the added cost before we touch them.
- Finish and color
- Bare Galvalume costs the least. Painted panels with a high-grade coating cost more but hold their color much longer.
- Extras
- Snow guards, ridge venting and changes to your gutters add to the total. We list each one so you can decide.
Metal roofing questions
Something not covered here? (317) 316-3479
Will I hear every raindrop under a metal roof?
No. On a home, the panels sit on solid decking with underlayment between, and that soaks up most of the sound. Most people say a storm sounds about like it did with shingles. The racket folks picture comes from barns and sheds, where metal is screwed straight to open rafters.
Does a metal roof draw lightning to my house?
It doesn't. Lightning strikes whatever stands tallest nearby, and the roofing material plays no part in that, so metal is no more of a target than shingles. If a strike ever happens, the panels won't burn, which is a point in their favor.
Can you install metal over my existing shingles?
In some cases. Code caps how many layers a roof can hold, and an overlay hides the decking so we can't check it or fix it. Most of the time we suggest tearing off, but if the roof underneath is solid we will walk you through both choices.
How does metal hold up to hail?
Big hail can leave dents, mostly on thin panels and aluminum. A lot of those dents are only looks and won't let water in. Heavier gauge steel stands up better, and we can bring impact-rated panels for you to see.
What upkeep does a metal roof need?
Very little. Clear leaves from the valleys and gutters, and keep off the panels, because foot traffic can bend seams. Don't let copper, treated wood or loose screws rest on the metal, and dab any scratches with matching touch-up paint. We hand you these notes in writing and come back to look the roof over once it has seen some weather.
Can I finance a metal roof?
Yes, financing is available. Bring it up when you call, and we will go through it with you alongside your estimate.
Find out if metal fits your home
We will get on the roof, look at what you have and tell you straight whether metal is worth it. The inspection is free, and there is no obligation.